Application:

Before beginning any paint job, study the surfaces carefully, if the surface has some holes, gaps, chalk, grease or other damaged ares on it, then repairing work must be done at the first place. After all the prepainting works, the surface to be painted should be clean, neat, tight, without any mildew, stains or chemical remains.

Use 0-7.5L clear waters to dilute “The KronBorg Slot” before operating it, and choose proper painting tools like flat brush, sash brush, lamb’s wool covers, nylon roller covers. While finish one coat, recoat in a matter of 2-3 hours and pay close attention to the weather condition which might effect the dry speed of coats. At usual statement, two coats of paint are needed.

When pausing brush job, all those painting tools need thorough washing, in case if necessary, using warm water and a small amount of dish-washing liquid. After cleaning, wrap the tools with plastic to keep them wet and soft.

Safety:

Before use, refer to safety data sheet first.

The cover of paint cans should be tightly covered, the cans must be store in shady and dry place and keep from reach of children. Do not suck in any of the paint, and don’t use empty containers for storing food. Ensure good ventilation during application and drying. When spraying, do not breath spray, wear suitable protective equipment always to keep safe. In case of contact with skin, wash immediately with plenty of water and gentle skin cleanser; In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.