Technical indicators：

Standard tensile strength 1.4MPa

Standard elongation 280%

Heat-resistant tensile strength 1.6MPa

Heat-resistant elongation 250%

Alkali-resistant tensile strength 1.0MPa

Alkali-resistant elongation 350%

Executive standard: GB/T23445-2009 "polymer cement waterproof coating" type I standard.

Scope of application：

The waterproof layer has excellent flexible elongation, which can resist slight vibration of the building structure and a certain degree of displacement. It is recommended to be used for waterproofing of roofs and terraces, yin and yang corners of toilets and pipe roots, or waterproof projects such as subways, tunnels, and bridges that have high requirements on elongation performance.

Construction Guide：

Slurry preparation:

Open the lid of the bucket, take out the material bag in the bucket, pour all the emulsion of component A into the bucket, turn on the electric mixer, slowly add all component B and stir until it is uniform and particle-free, let it stand for 5 minutes, and stir again 1-3 minutes (according to the consistency of the slurry, a small amount of water can be added appropriately to adjust the slurry to a viscous, non-foaming and fluid state);

Construction technology:

Apply the prepared waterproof slurry on the waterproof base surface with a Kun tube and a brush, and carefully check whether there is any leakage or flaws in the waterproof coating. The coating operation should be completed within 90 minutes.

This product is used for moisture-proof, and can be coated with one layer; for waterproof, it should be coated with at least two layers. The overcoating time is about 2-4 hours (temperature 25℃, relative temperature 50%), and the brushing direction should be perpendicular to the brushing direction of one layer.